Perencanaan Perkerasan Lentur Ruas Jalan Pao - Pao – Bajimangai Maros
DOI:
https://doi.org/10.52722/43a8g007Kata Kunci:
Component Analysis Method, 2024 Pavement Design Manual, Pavement ThicknessAbstrak
The Pao-Pao - Bajimangai road improvement is an activity to overcome the problems complained about by the Bajimangai community, where the road axis is an alternative route for the community to Kariango. The research was conducted by planning to design the thickness of flexible pavement using the Component Analysis method and the 2024. The design pavement thickness 3 results include a 30 mm thick HRS-WC surface layer, 35 mm thick HRS-Base, a class 150 mm thick for the upper foundation layer and 125 mm for the lower foundation layer with LPA class B. The design 3A consists of a 40 μm thick AC-WC surface layer, a 60 μm thick AC-BC layer, and a 400 μm thick Class A top layer. A 50 mm thick melting layer, 150 mm thick crushed stone, and 100 mm thick sandy soil were obtained using the Component Analysis method. The class A Top Foundation Layer is 30 mm thick, the HRS-WC surface layer is 30 mm thick, the HRS-Base is 35 mm thick, and the bottom foundation layer uses 125 mm thick class B LPA.
Unduhan
Referensi
[1] I. Putri Syuhada, H. Yermadona, And S. Eka Priana, “Evaluasi Perbandingan Metode Komponen Bina Marga dan Tebal Perkerasan Lentur Mdpj 2017,” Err, Vol. 1, No. 3, Pp. 29–34, Aug. 2022, Doi: 10.33559/Err.V1i3.1233.
[2] E. Marlina, J. H. Frans, And J. K. Nasjono, “Analisis Tebal Perkerasan Lentur Dengan Metode Bina Marga 2017 Dan Program Kenpave,” Jurnal Teknik Sipil, Vol. 12, No. 2, 2023.
[3] A. Kumalawati, F. S. Nara, And J. K. Nasjono, “Perencanaan Tebal Perkerasan Lentur Ruas Jalan Baumata-Tarus Dengan Metode Bina Marga 2017,” Jurnal Teknik Sipil, Vol. 13, No. 1, 2024.
[4] W. Murad And M. Novera, “Desain Perkerasan Lentur Berdasarkan Metode Bina Marga Ruas Jalan Simpang Seling – Muara Jernih Kabupaten Merangin,” Talentasipil, Vol. 2, No. 1, P. 16, Mar. 2019, Doi: 10.33087/Talentasipil.V2i1.14.
[5] A. Rahmawati, F. Aldiansyah, And D. M. Setiawan, “Desain Tebal Perkerasan Lentur Jalan Menggunakan Program Kenpave Di Ruas Jalan Maospati - Sukomoro, Kabupaten Magetan, Jawa Timur,” Bull Civ Eng, Vol. 1, No. 1, Pp. 19–23, Feb. 2021, Doi: 10.18196/Bce.V1i1.11050.
[6] Ayukardona, R. Rachman, And L. E. Radjawane, “Kajian Perencanaan Tebal Perkerasan Jalan Nasional Poros Bua – Rantepao,” Pcej, Vol. 3, No. 4, Pp. 548–557, Dec. 2021, Doi: 10.52722/Pcej.V3i4.334.
[7] S. Sumarsono And H. J. H. Gultom, “Perbandingan Analisa Perkerasan Metode Bina Marga Revisi Juni 2017 Dan Aashto 1993 (Studi Kasus Pada Pekerjaan Rencana Preservasi Ruas Jalan Jatibarang-Langut Ta 2017),” 2017.
[8] A. S. Ariyanto And S. Sarwanta, “Perbandingan Perencanaan Tebal Lapisan Perkerasan Lentur Dengan Metode Aashto Dan Mdp,” Jri, Vol. 7, No. 2, Pp. 1–6, Nov. 2021, Doi: 10.31943/Jri.V7i2.178.
[9] U. Nazar, H. Yermadona, And S. Dewi, “Perbandingan Perencanaan Tebal Perkerasan Lentur Dengan Mdpj 2017 Dan Metode Analisa Komponen 1987 (Studi Kasus Jalan Subarang Taram Kabupaten Limapuluh Kota),” Err, Vol. 2, No. 1, Pp. 55–59, Nov. 2022, Doi: 10.33559/Err.V2i1.1358.
[10] H. Prasetiyo, Y. C. S. Poernomo, And A. I. Candra, “Studi Perencanaan Perkerasan Lentur Dan Rencana Anggaran Biaya (Pada Proyek Ruas Jalan Karangtalun – Kalidawir Kabupaten Tulungagung),” Jurmateks, Vol. 3, No. 2, P. 347, Oct. 2020, Doi: 10.30737/Jurmateks.V3i2.1187.
[11] C. Hidayatulloh And A. Ariostar, “Perencanaan Geometrik Dan Perkerasan Lentur Jalan Raya (Studi Kasus: Ruas Jalan Tarutung - Bts. Kabupaten Tapanuli Selatan),” Komposit, Vol. 5, No. 2, P. 75, Mar. 2022, Doi: 10.32832/Komposit.V5i2.6283.
[12] A. Arthono And V. A. Permana, “Perencanaan Perkerasan Lentur Jalan Raya Menggunakan Metode Analisa Komponen Sni 1732-1989-F Ruas Jalan Raya Mulya Sari Kecamatan Pamanukan Sampai Kecamatan Binong Kabupaten Subang Propinsi Jawa Barat,” Komposit, Vol. 6, No. 1, P. 41, Mar. 2022, Doi: 10.32832/Komposit.V6i1.6740.
[13] H. R. Malau, “Perencanaan Perkerasan Lentur Menggunakan Metode Mdp 2017 Dan Aashto 1993 Pada Jalan Masuk Kahui,” Vol. 7, No. 1, 2017.
[14] Aris Krisdiyanto, Kemmala Dewi, And Moh .Arif Wijayanto, “Analisa Perbandingan Perencanaan Tebal Perkerasan Lentur Metode Aashto 1993 Dan Tebal Perkerasan Lentur Metode Bina Marga 2017,” Jts, Vol. 15, No. 1, Pp. 22–33, Jul. 2022, Doi: 10.56444/Jts.V15i1.34.
[15] I. Amranadi, S. Eka Priana, And D. Kurniawan, “Perencanaan Tebal Perkerasan Ruas Kabupaten Padang Lawas Provinsi Sumatera Utara – Kabupaten Musus dan Kabupaten Pasaman Provinsi Sumatera Barat pada khususnya,” Err, Vol. 1, No. 1, Pp. 20–26, Nov. 2021, Doi: 10.33559/Err.V1i1.962.
Journal Template
