Karakteristik Campuran AC-WC Menggunakan Batu Sungai Sarambu Bittuang Kabupaten Tana Toraja
DOI:
https://doi.org/10.52722/bkfqzr66Keywords:
AC-WC, river stone, marshall immersion, retained marshall stabilityAbstract
Asphalt mixtures has a crucial role in road pavement. Tana Toraja Regency has Sarambu Bittuang River Stone resources that have the potential to be used in AC-WC mixtures. This research aims to determine the composition for AC-WC mixtures through conventional Marshall testing and to obtain the results of the Retained Marshall Stability of the AC-WC mixture from Sarambu Bittuang River Stone. The testing included Marshall Immersion. The research method included testing the characteristics of the aggregate (Los Angeles abrasion test, gradation, and Marshall testing (stability, flow, VIM, VMA, and VFB) according to the 2018 Bina Marga General Specifications. The findings of the research are that the Optimum Asphalt Content (OAC) is 7.00%, with the mixture composition being coarse aggregate 32.59%, fine aggregate 57.23%, and filler 3.18%, and the Retained Marshall Stability value is 95.89%, indicating that this mixture demonstrates good resistance to immersion.
Downloads
References
[1] R. A. Samudro, B. Rahardjo, dan P. -, “Analisis Kinerja Menggunakan Resin Lycal Ditinjau dari Parameter Marshall ,” J. Jalan Jemb., vol. 41, no. 1, hlm. 53–60, Jun 2024, doi: 10.58499/jatan.v41i1.1180.
[2] R. Is Dayanti, I. Irwansyah, dan W. Alamsyah, “Abu Batu Kapur Sebagai Alternatif Filler dalam Campuran Aspal Beton untuk Lapisan Aus,” J. Ilm. Telsinas Elektro Sipil Dan Tek. Inf., vol. 7, no. 1, hlm. 65–73, Apr 2024, doi: 10.38043/telsinas.v7i1.5096.
[3] Y. Pranata Siregar dan P. J. Osly, “Analisis Karakteristik Campuran Aspal dengan Limbah Plastik Low Density Polyethylene,” J. ARTESIS, vol. 3, no. 2, hlm. 225–232, Nov 2023, doi: 10.35814/artesis.v3i2.5932.
[4] M. T. Putra, H. R. Destania, dan F. Febryandi, “Analisis Karakteristik Marshall Campuran Aspal Modifikasi pada Asphalt Concrete – Wearing Course (AC – WC) dengan Penambahan Serbuk Ban Kendaraan,” J. Tek. Sipil, vol. 19, no. 2, hlm. 335–350, Okt 2023, doi: 10.28932/jts.v19i2.5580.
[5] R. Rudi, “Analisis Penggunaan Abu Batu Apung Sebagai Substitusi Filler pada Campuran Aspal Panas dengan Variasi Perendaman,” Gorontalo J. Infrastruct. Sci. Eng., vol. 6, no. 1, hlm. 7, Apr 2023, doi: 10.32662/gojise.v6i1.2714.
[6] M. Riski, H. Azwansyah, dan E. T. Mukti, “Effect of number of impacts on the voids of ac-wc Mixture with cement additive as filler,” J. Tek. Sipil, vol. 25, no. 1, hlm. 1859–1869, Apr 2025, doi: 10.26418/jts.v25i1.88874.
[7] Asmaroni, Ahmad Fatoni, dan Alfita Yusriyah, “Pengaruh Penggunaan Aspal Plastik Recycle dan Aspal Pen 60/70 Pada Campuran Aspal Panas AC-WC (Asphalt Concrete Wearing Course) Menggunakan Agregat Lokal Madura Terhadap Karateristik Marshall,” Ge-STRAM J. Perenc. Dan Rekayasa Sipil, vol. 6, no. 2, hlm. 66–71, Sep 2023, doi: 10.25139/jprs.v6i2.5711.
[8] D. Syahputra, B. S. Subagio, dan E. S. Hariyadi, “Asphalt Concrete – Wearing Course (Ac-Wc) With Crumb Rubber Mixture Performance Evaluation,” J. Tek. Sipil, vol. 26, no. 3, hlm. 223–230, Jan 2020, doi: 10.5614/jts.2019.26.3.5.
[9] V. Pinangkaan, T. P. F. Sompie, dan S. Sudarno, “Analisis Perbandingan Karakteristik antara AC-WC Asbuton dengan Cold Paving Hot Mix Asbuton (CPHMA),” Semesta Tek., vol. 25, no. 1, hlm. 60–70, Mei 2022, doi: 10.18196/st.v25i1.13716.
[10] A. Subandi dan S. Sartono, “Perubahan Karakteristik Campuran Aspal AC-WC dengan Penambahan Sampah Plastik,” RekaRacana J. Tek. Sipil, vol. 9, no. 1, hlm. 56, Apr 2023, doi: 10.26760/rekaracana.v9i1.56.
[11] A. S. Lubis, Z. A. Muis, R. Anas, A. P. Rambe, dan C. A. Sarah, “Pengaruh Penambahan Silica Fume Terhadap Karakteristik Campuran Asphalt Concrete Wearing Course (AC-WC),” Blend Sains J. Tek., vol. 2, no. 3, hlm. 228–234, Jan 2024, doi: 10.56211/blendsains.v2i3.393.
[12] H. Heru dan F. Rosyad, “Analisis Terendamnya Perkerasan Aspal Oleh Air Laut Ditinjau Terhadap Karakteristik Marshall,” Rang Tek. J., vol. 6, no. 1, hlm. 127–132, Jan 2023, doi: 10.31869/rtj.v6i1.3505.
[13] A. Iman Adiwidodo, H. Rahman, dan N. Zain, “Analisis Kinerja Modulus Resilien dan Ketahanan Fatigue Campuran AC-WC dengan Asbuton Murni, BNA Blend, dan Aspal Pen 60/70,” J. Tek. Sipil, vol. 30, no. 3, hlm. 481–490, Des 2023, doi: 10.5614/jts.2023.30.3.16.
[14] M. M. Oleiwi dan A. K. Albayati, “Contributory Factors related to the Tensile Strength of Hot Mix Asphalt Concrete,” Eng. Technol. Appl. Sci. Res., vol. 14, no. 4, hlm. 15903–15909, Agu 2024, doi: 10.48084/etasr.7928.
[15] I. D. M. A. Karyawan, R. Yuniarti, D. Widianty, H. Hasyim, dan M. Wahyudi, “Performance of Asphalt Mixture with Asbuton Based on Marshall Characteristics Compacted at Hot and Cold Temperatures,” J. Penelit. Pendidik. IPA, vol. 7, no. 4, hlm. 549–555, Sep 2021, doi: 10.29303/jppipa.v7i4.884.
Journal Template
